Row Dependent Soil Cultivation GF 200
Soil Cultivation
Row Dependent soil cultivation GF 200
The rotary tiller type GF 200, mounted in the rear or in the front of the tractor, is suitable as a full width tiller for an optimum seedbed preparation for the cultivation of various vegetables and potatoes.
An ideal prepared seedbed is the prerequisite for optimum development of the seed resp. planting tubers. Through intensive soil cultivation, root crop ground preparation is perfectly achieved so that undisturbed growth of the crop can be guaranteed.
For conventional hilling (in a second working step) the rotary tiller GF 200 can be modified to be used as a rotary hiller with rear attachment at the tractor.
The machine can be converted from independent rows to a full width tiller with a few simple steps. When attached to the front of the tractor, the GF 200 can be perfectly combined with a potato planter at the rear side of the tractor.
The drive is designed for a tractor output up to 165 HP.
Product Highlights
Suitable for very stony soils
Rotor shaft with extra stable spikes for very stony conditions.
Combined plant protection
GRIMME tank system TS 420 on the rotary hiller GF 200 at tractor front. Authorized for liquid chemicals to be applied onto the seed potatoes and/or into the furrow.
Even deep guidance
The large carriage roller ensure an even working depth.
Preparatory work
Ridge shaper with integrated formers that prevent loosened soil from being compacted by the tractor wheels.
The ideal combination
The GRIMME Rotary Tiller GF 200 with front attachment, is ideally suited to be combined with a trailed or mounted 2-row potato planters. Convenient especially for short headlands and smaller acreage, a compact tractor implement combination is available for these requirements.
The ideal seedbed
Through intensive soil cultivation, root crop ground preparation is perfectly achieved so that undisturbed growth of the crop can be guaranteed.
Technical Specifications
All figures, data and facts about this machine. Standard equipment, dimensions, performance and much more.
- GF 200 front attachment:
- Working width 1.50 m (row width 75 cm), full width tiller
- Rotor shaft with 64 tines with additional welded wear protection (50 x 12 mm)
- Height adjustable carrying roller in front of the rotary tiller
- Three-point linkage Cat. 2
- Walterscheid drive shaft with friction clutch and 6 grooves
- Gearbox, 350 rpm, single drive for max. 165 HP
- Side gearbox with spur gears in it´s own housing
- Ridge shaper with centre shaper for ridge pre-shaping
- GF 200 rear attachment
- Row width 75 cm, rotary hiller
Rotor shaft with 32 tines with additional welded wear protection (50 x 12 mm) - 2 infinitely height adjustable support wheels for depth control
- Shaping board for bulbous ridges
- Shaping board pressure adjustment via springs
- Manual levelling adjustment of the shaping board via spindles
- Three-point linkage Cat. 2
- Walterscheid drive shaft with friction clutch and 6 grooves
- Gearbox, 350 rpm, single drive for max. 165 HP
- Side gearbox with spur gears in it´s own housing
- Row width 75 cm, rotary hiller
